Motorcycle Rain Jacket

Buying a Motorcycle Leather Jacket - Some Tips

Motorcycle jackets are, of course, an essential item for motorcycle riders and reflect the personality of the wearer. There are many other considerations however, apart from good looks. High on the list of priorities is how well the jacket will protect you in the event of an accident. Is the jacket comfortable when riding and suitable for both summer and winter wear? Motorcycle jackets are expensive so they should be durable and last for many years.

Some Considerations when Buying a Motorcycle Leather Jacket

The fit - Motorcycle jackets are designed to be comfortable when in a riding position so the jacket should be shorter at the front, to prevent riding up, and longer at the back to provide adequate cover. The sleeves should be long to cover your wrists when holding the handle bars and it should be roomy in the shoulders for ease of movement. The neck should be snug but not restrictive and the wrists and waist should have closures to keep out the wind.

Protective Armor - Motorcycle jackets, above all, must provide protection in the event of you coming into violent contact with the road. Adequate padding is necessary jackets are usually padded at the elbows, back and shoulders. Padding may be extra material or better still plastic inserts or reinforced Kevlar. Make sure the armor stays in place when you wear the jacket. Some inserts tend to move around.

Pockets - most motorcycle jackets have plenty of pockets. Opt for ones with flaps as wind can get through zippers unless they have material patches if the back or front. Inner pockets are useful for keeping your wallet and cash in.

Liners - removable insulated liners are great for using the jacket in cold weather.

Vents - vents are necessary to allow you to be cool in the summer. Leather is very warm so you'll overheat in the summer months unless there is a way to allow air circulation in the jacket.

Color and reflective materials - black is the traditional color for motorcycle jackets and although it look good it's not the best material for safety reasons. You can't easily be seen in a solid black jacket! Some type of reflective material is necessary but we don't want to spoil the looks of the jacket with huge neon stripes! White piping on the back and sleeves can be reflective and logos are often also made from reflective materials.

Winter riding - In the winter you need maximum protection from the elements. A jacket that is cut long, below the hip is better at keeping out the wind and cold. Heavy insulation, often in the form of removable linings is needed and the jacket should be adjustable to give a snug fit at wrists, waist and neck to keep out the wind and cold. Adjustable flap type collars are better than zips and fit snugly but not too tightly.

Leather in the rain - Leather is not meant to get wet so wear a rain suit over your leather jacket in the rain. Water will deplete the natural oils in the leather and lead to deterioration and cracking. If it does get wet hang the jacket up in a warm place, away from any direct sources of heat.

Oiling your leather jacket - You should oil your jacket occasionally especially after it gets wet using a mink oil specially made for leather. this will replace the natural oils in the leather and help to keep it supple and looking good. With care a quality leather jacket should last at least ten years.

Tips for buying motorcycle leather jackets

Buy the best quality within your budget
The leather should be 1.2mm thick at a minimum.
The stitching should be firm and well done especially in areas that will be under strain.
Sleeves should be slightly longer to cover wrists when riding
Leather at the neck should be soft enough to prevent chaffing